With all the different in bed accessories available, we saw a need to supply you with a custom bed bolt kit Both options will thread directly into the factory placed...
Made to bolt on directly to your pickup truck bed bolts or cargo trailers Contructed from high strength steel with durable black zinc plated to prevent rust Ideal to tie...
 -Description- -Alleviate the common issue of bed bounce and flex with our NEW KHC Bed Support Strengthening system. -Bolts in using factory bed bolt and the factory bed extender provisions....
Crack open a cold one on your new KHC Off-Road "Tailgater" Bolt in Bed Supports!! Â This new kit sports the greatest nations Flag and a stainless steel bottle opener...
KHC Off-Road Standard and Extended length skid plate mounting brackets  -Replaces the factory bracket on a Gen 2 Ford Raptor or Allows for 13th Generation F-150 owners to bolt...
THIS KIT WAS ASSEMBLED WITH SOME OF THE STRONGEST HARDWARE ON THE MARKET. FITS GEN 1 AND GEN 2 FORD RAPTOR OEM AND SOME AFTERMARKET LOWER CONTROL ARMS THE REPLACEMENT...
This conversion kit was created from necessity. With the abundant availability of Gen 2 take off coilovers it was only natural for this kit to be developed. Hand Crafted in...
Not long after we released the conversion buckets we realized there was a need to properly run GEN 2 Raptor rear shocks on the Gen 11 and Gen 12 F150s, This...
I finished up the updates on the Lower Control Arm pocket support system. I have fixed more than a few bent LCA pockets which is what inspired this kit. The...
 Ford Raptor Leaf Spring U-Bolt kit Compatibility may vary, but should work with OEM, Deaver and Icon leaf springs, may work with other springs, please measure to confirm before...
This conversion kit was created from necessity. 13th Generation F150 owners strive for the off-road capabilities of a Ford Raptor without the hefty price tag.  Hand Crafted in the...
 This tail pipe kit was designed to maximize ground clearance and increase departure angles. System is not visible from rear of truck The kit includes all mounting hardware. Two...
Our Ford Raptor Bolt on Differential Skid Plate is a must have when taking to the trails. Â This kit is available for both Gen 1 ,2and 3Â Raptors and...
KHC OFF-ROAD BED MOUNTED FLAG POLE / ANTENNA MOUNT - bed supports NOT required Keeps Your Flag Safe and Secure. With this Ford F150 Single Flag Holder Kit, you can finally...
Replace those old worn out LCA bolt with our high strength Replacement kit   The standard OEM replacement kit includes: 4 x M18-2.5 x 140mm class 10.9 bolts 4...
We finished up the updates on the Lower Control Arm pocket support system. I have fixed more than a few bent LCA pockets which is what inspired this kit. The...
These Fabricated heavy duty for downs are constructed from 3/16 steel with optional powder coating.  From spare tires, to atvs, coolers and more, *Once secured, the tie down will...
The hardware installed by Ford are torque to yield, meaning they are no supposed to be reused This kit includes hardware which are direct replacement on Ford F150s and Gen...
 OUR NEWLY RELEASED KHC OFF-ROAD FABRICATED SHACKLES ARE OVER DESIGNED TO BE TOUGH AND WILL TAKE WHATEVER YOU CAN PUT THEM THROUGH. THE SHACKLE BODY IS BUILT FROM 3/16...
  Reduce the risk of cracked leaf springs on your F150 and Gen 1 and 2 Raptor.s  This kit includes two powder coated plates and install very easily....
This Versatile Flat Tire Storage Mount Is A Great Option For The Weekend Warrior And Aggressive Off-Roader. - Built And Gusseted From 3/16 Steel, Holds Up To A 40" Tire!!...
Hand Crafted in the USA out of industry leading 1/4" thick steel making our buckets the strongest on the market  The conversion kit comes with both driver and passenger side...
 Our Rear dove tail cut bumper fits Ford 2015-current F150s and 2017 Ford Raptors 2017-current and was designed to increase off road departure angle while maintaining a clean, finished...
 THESE PLATES ARE DESIGNED TO WORK WITH OUR KHC GEN2 RAPTOR REAR DOVE TAIL BUMPER. THEY ADD A FINISHED LOOK TO THE DOVE TAIL CUT BED SIDES, WHILE HELPING...
We assembled these kits with the best of the best when it comes to lug nuts. All Kits include 24 Lug Nuts and one spline drive key (extras optional) The...
If Your replacing your shackles or springs, the OEM Bolts are one time use, Hardware is either Grade 8 or Metric 10.9 equivalent (zinc finish may vary between standard and...
Fitment: 2011-2014 & 2017-current Raptor, 2015-current F150 with 9.75 rear differential (will not fit super 8.8) (sorry 2010 guys, your axle housing is different)   Help all your unleashed power...
  We have assembled this kit with the best, most durable parts on the market to cure the common problem of damaged, dry rotted tie rod boots. This kit...
AUTHENTIC DEAVER SPRING INSTALLATION KITS KIT INCLUDES: 4 X LEAF SPRING U-BOLTS WITH WASHERS AND NUTS 8 X LEAF SPRING BUSHINGS WITH SLEEVES (GENERATION SPECIFIC) 2 X SPRING TO FRAME...
Fitment:Â Â 2017-current Raptor & 15-current F150 Â Engine skid plate mimics the OEM Ford engine skid, if your running a KHC Off-Road Stage 2 Slot Delete, please choose the option above...
TOTALLY ENCLOSE & PROTECT YOUR ROD ENDS FROM DIRT & MOISTURE  THESE “BOOTS” COMPLETELY ENCLOSE THE HEAD PORTION OF THE ROD END AND ARE HELD IN PLACE BY THE...
When you have our Stage 2 or 3.0H slot delete kit, the OEM skid plate can not be reinstalled. This replacement skid will take its place. made from 1/4" marine...
Don't get stuck on the side of the road or trail because of a melted fuse terminal, easy and quick to install with common hand tools  Product Description This fuse...
 PROTECT YOUR INVESTMENT WITH OUR FULL COVERAGE SKID PLATE. USES ALL FACTORY MOUNTING LOCATIONS AND INCLUDES ALL HARDWARE. BUILD FROM 1/4" MARINE GRADE ALUMINUM  *NOT DESIGNED TO WORK...
 This kit was specific designed with the 2015-2020 F150 4wd This kit not only adds a support to the rear pocket but all the mounts. It also locks the...
This Versatile Flat Tire Storage Mount Is A Great Option For The Weekend Warrior And Aggressive Off-Roader. - Built And Gusseted From 3/16 Steel, Holds Up To A 40" Tire!!...
Take your Raptor or FRaptor to the next level with this Stock Replacement Fabricated LCA This kit is designed to directly replace your weak, worn out OEM arms. Its designed...
THESE WELD ON SUPPORTS ARE A MUST HAVE FOR PROTECTING THE REAR MOST DRIVETRAIN CROSS MEMBER UNDER THE TRANSFER CASE. THEY CAN ALSO BE USED TO REPAIR AN ALREADY DAMAGED...
This conversion kit was created from necessity. With the abundant availability of Gen 2 take off coilovers it was only natural for this kit to be developed. Hand Crafted in...
Are famous bed supports now for Super duty!! 2017 -UP!! Made Proudly in America Bolts right in ! Made from 3/16 steel all hardware included ! These come standard black...
Made from 1/4 aluminum. Mounts to factory rear cargo tie downs, pass or driver side. Uses quickfist clamps or clamps of your choosing. (not included) Fits 09-14 F150/Raptor.
 Raptor Gen 2 Modular Tire Carrier.  This product has many options, so please call the shop to place the order of interested All of our products are made...
This Heavy Duty lower intercooler mount was born from necessity. We have repaired plenty of lower brackets to know this was needed. Kit is bolt on and all hardware is...
 THIS PRO EAGLE JACK MOUNT IS BUILT FOR THE 2 TON (NONE LARGE WHEELED) JACKS  Features - Item will be powder coated dark grey unless otherwise specified, contact...
 This mount was designed with HPA Systems to conveniently and safely mount an HPA AirLift 580 The Hpa Jack is securly held in place with forward tabs and a...
 KHC's S1 Frame Cut Front Bumper for Gen 1 Raptors, Bumper is constructed from 3/16 and 1/4 steel. The skid plate is made from 1/4 Aluminum. DEFAULT COATING IS...
This Bypass Rack was made for a customers special request to have a through bed shock setup, but not lose use of his bed. Bolts in to the bed using...
 After a nice long wait, the KHC Rear Dove Tail Bumper is ready!!! Increase your departure angles and look bad a$$ doing so!!  Our Bumpers are made to...
Made from 1/8 thick aluminum, this Fuel Tank Skid plate is a great upgrade above the OEM Polycarbonate one. Â The skid is a direct replacement and reuses all factory...
This system includes a new upper strut mount as well as pre-load spacers. The use of a pre-load spacer increases performance in cornering as well as offsets the increase weight...
Fitment:Â 17-Current Raptor, 15-current F150 THIS MOUNT EASILY BOLTS INTO A GEN 2 RAPTOR BED USING THE FACTORY BED BOLTS. ITS DESIGNED TO HOLD A PRO EAGLE JACK (NON BIG WHEEL)...
