KHC Gen 1 Lower Control Arm Slot elminator and support kit

(No reviews yet) Write a Review
$40.00 (Fixed Shipping Cost)

I finished up the updates on the Lower Control Arm pocket support system. I have fixed more than a few bent LCA pockets which is what inspired this kit. The rear pockets are very prone to bending on both gen1 and gen2 due to lack of support on the back of the pocket along with the stock rubber bushing deflection during a impact allowing in to easily bend the rear pocket. 

This kit not only adds a support to the rear pocket but all the mounts. It also locks the lower control arms in the outer most position (recommended), center position or the holes can be slotted so you can still adjust the alignment from the lowers. ----- I highly recommend locking the lowers in place and using adjustable upper control arms if you are running offroad because when aligning Raptors from lower control arm cam bolts only it is prone to getting thrown out of alignment.------ 

- Bolt in design- can also be welded
- works with stock swaybar
- made from 3/16 steel plate
- includes all hardware 

Product is powder coated black or silver by default, if a special color is requested please contact the shop @ 732-951-9111


 *adjustable upper control arms are required